Transparent epoxy gel coat, 1.38 kg pack.

EP-Gelcoat transparent can be tinted with thixotropic (non-dripping) colouring pastes produced under vacuum, optimally free of air bubbles and homogeneous.

No permanent resistance to UV light (yellowing occurs), which must therefore be protected, if necessary, against UV radiation with an additional coating (clear varnish or matt varnish)

Epoxy Systems is a registered trademark of R & G.
This colourless, non-drip formulated gelcoat can be tinted matt with R&G Universal Colour Paste and clear/transparent with R&G Transparent Colours.
To be applied by brush, roller or spatula.

Consumption: approx. 0.3 kg / m²

Processing with hardener S (15 min), Catalyst P (30 min, additionally thixotropic), Catalyst L (40 min), Catalyst CL (60 min, distortion temperature increase ≤ 95 °C after post-curing) or EPH hardener 161 ( 90 minutes, (30 minutes, increased distortion temperature ≤ 120 ° C after post-curing).

Colorless EP-Gelcoat + hardener L
Mixing ratio: 100:38 parts by weight of hardening resin
Processing time (100 g / 20 ° C): 40 minutes
Gelling time (0.2 mm / 20 ° C): approx. 3 hours
Curing time (23°C): 24 hours
New Quality: Nonylphenol and DETA free.
PoxySystems® is a registered trademark of R & G